Examples of 'voltage test' in a sentence
Meaning of "voltage test"
voltage test: A voltage test is a procedure conducted to measure and verify the electrical voltage in a circuit or electrical system
How to use "voltage test" in a sentence
Basic
Advanced
voltage test
Minimum sensor voltage test cycle.
Voltage test under load.
Maximum sensor voltage test cycle.
All electrical circuits shall undergo an excess voltage test.
High voltage test devices.
I will try one on voltage test.
Applying a voltage test pulse then may trigger a resonance response.
Function test with cameras and high voltage test.
Abnormal voltage test.
You do that with a visual check followed by a voltage test.
The voltage test pulse may be as described in the first or the second aspect.
Rated lightning impulse withstand voltage test type test.
The voltage test pulse thereby is generated in an idle phase of the salient machine.
Only a perfect mechanical connection ensures safe contact and thus an unambiguous voltage test.
Voltage test through red LED and buzzer.
See also
OEM versions of the instruments are also supplied to manufacturers of high voltage test sets.
A Withstand voltage test.
However, each voltage test degrades the isolation barrier of the transformer.
Short circuit I and N and carry out the high voltage test against earth.
Rather, they use a constant voltage test which produces more impressive sensitivity ratings.
In this case, a substantial current is present at the end of the voltage test pulse.
In the prior voltage test the sample is immersed in salt water bath for 10 minutes.
Nevertheless, still a damped resonance response occurs at the end of the voltage test pulse.
IQC - Withstand voltage test of copper wire.
Fig . 7A thereby provides an insight in how a response to a voltage test pulse will behave.
Where applicable, the a.c. voltage test shall be performed before the impulse voltage test.
There are two common ways to test for a short: A low voltage test.
High voltage test ( enamel ) max.
Pass 3kv high voltage test.
These are generally more progressive than the “ go / no-go ” nature of the cranking voltage test.
Non contact voltage test “ NCV ”.
Partial discharge ( PD ) is often an area of concern in a high-voltage or surge voltage test.
If no exposed conductor is visible the 1kVolt, 1 minute withstand voltage test is performed.
After charging please wait 15 to 30 minutes before repeating the voltage test.
The impulse test shall be carried out first and the a.c. voltage test afterwards.
You'll also be interested in:
Examples of using Test
Show more
Mechanical tensile test prehoistable navigation lights
A test with tripping is compulsory on installation startup
Before the test we had art class
Examples of using Voltage
Show more
Voltage drop due to use of extension cable
Information on the voltage is on the rating plate
Voltage measure switch for phase voltage
