Examples of 'adjusting lever' in a sentence
Meaning of "adjusting lever"
adjusting lever - This phrase refers to a mechanical device or component designed to make small changes or modifications to something. It typically involves a lever that can be manipulated or operated to adjust the settings or position of a device, system, or mechanism. The phrase is commonly used in engineering, mechanics, and other technical fields that involve mechanical systems
How to use "adjusting lever" in a sentence
Basic
Advanced
adjusting lever
Push down depth adjusting lever to lock.
Adjusting lever for orbital action.
Check to be sure depth adjusting lever is secure.
Set the adjusting lever at a desired position.
Smooth adjustment thanks to long adjusting lever.
Set the adjusting lever to coarser.
Move the temperature adjusting lever.
Lift the depth adjusting lever and move up to increase.
Raise the cutter deck by using the cutting height adjusting lever.
Now turn the adjusting lever slightly counter clockwise.
Set the chute in the desired ejecting angle using the adjusting lever.
Also check to be sure miter adjusting lever is secure before cutting.
The shoe can not be adjusted without opening the shoe adjusting lever fully.
Set the zig zag width adjusting lever at buttonhole position.
Adjust the chute discharger in the desired ejecting angle using the adjusting lever.
See also
Pull the mowing height adjusting lever toward.
Move the width adjusting lever to the right side a little stitch width become wider.
Adjust the iZi Up to the correct height by turning the height adjusting lever.
Push down the depth adjusting lever to secure the shoe position.
In this case, it is possible to find a position of the adjusting lever 11 figs.
Press down on the depth adjusting lever to secure the shoe position.
The lighters have a black, plastic trigger with a black, child-resistant switch and flame adjusting lever.
It is easier to move the mowing height adjusting lever with holding the tool firmly.
The adjusting lever is located in the right-hand mudguard.
In this position, tighten the adjusting lever again.
Move the depth adjusting lever towards the shoe and push down to secure the position.
After darning is completed, return the pressure adjusting lever to 3 for normal sewing.
Set the adjusting lever to “ coarse ” with the motor.
The orbital action can be adjusted with the adjusting lever 8, even during operation.
The adjusting lever can not be pushed to the “ fine ” setting.
Self-locking safety brake, adjusting lever need not be moved.
The adjusting lever ( V ) allows easy adjustment of nozzles to desired position.
Operating Instructions Rotate Flow Adjusting lever to vary the application rate of the fertilizer.
Increase the solution quantity using the appropriate adjusting lever 7, Fig . B.
Operate the cutting height adjusting lever several times to shake and release the collector channel.
The handlebar has to be turned 180 over the engine using the handlebar adjusting lever fig . 9.
The presser foot pressure adjusting lever should be set at “ 3 ” for regular sewing.
Lower cutting height, N Use the height adjusting lever ( 1 ) to.
Loosen the adjusting lever ( P ) and slide the locking plate to desired position.
Before inserting the saw blade 11 set the adjusting lever for pendulum action 7 to level III.
Turn the chute adjusting lever ( ill1-5 ) to adjust the horizontal ejector angle.
Start the plane with the depth adjusting lever set at “ 0 ” well behind the high spot.
Turn the chute adjusting lever ( ill1-6 ) to adjust the vertical ejector angle.
The opposite end of the adjusting lever 30 carries a toothed sector 30a centered on the pivot pin 32.
Adjust the adjusting lever to “ HARD ” or.
N Turn the adjusting lever ( 3 ) upwards and remove.
N Use the height adjusting lever ( 1 ) to raise the mower - the lever is pushed forwards.
Lift up the depth adjusting lever ( H ) Fig . 9 at the rear of the saw.
You'll also be interested in:
Examples of using Adjusting
Show more
Adjusting the balance effects all sources
Proceed as for adjusting the left fence
Adjusting the white balance manually recommended
Examples of using Lever
Show more
Do not lift lever during brewing cycles
Lever can be adjusted to a different lever angle by
Open the lock lever to unlock footplate
