Examples of 'screw clamp' in a sentence
Meaning of "screw clamp"
A screw clamp is a type of tool or device that is used to hold objects tightly together. It typically consists of a threaded screw and two plates or jaws that can be tightened or loosened by rotating the screw, providing a firm grip or clamp on the objects being held
How to use "screw clamp" in a sentence
Basic
Advanced
screw clamp
Secure in place using duct tape or a screw clamp.
Secure small workpieces by a screw clamp or vice to ensure safety.
A screw clamp may be used to help regulate the gas.
This includes the weight of the screw clamp.
Turn the screw clamp clockwise to securely tighten the workpiece in the vise.
Stamp letters in a screw clamp.
Unscrew the screw clamp enough to fit the clamp around the metal post.
Do not use tinned strands in connection with screw clamp connections.
Hold them together with a screw clamp and fit the bolts that hold the hoods together.
Ground the external antenna from the y terminal against lightning with the screw clamp.
The work vise is equipped with a threaded screw clamp and handle for tightening the vise.
Use the screw clamp to secure the Rubber Connection Hose to the plumbing drain connection.
For your own safety, use a vise or screw clamp to secure small workpieces.
The apparatus of claim 1, wherein said clamping device comprises at least one screw clamp.
The screw clamp 25 is then tightened to secure the distance pole 22 into the desired position.
See also
If you connect an outdoor antenna, ground from y terminal with the screw clamp against lightning.
Tighten the screw clamp onto the I.V. pole by turning the black knob clockwise.
A typical device for securing a medical device to a mounting rail is an L-bracket and a screw clamp.
Attach to plumbing with screw clamp ( part C ) and tighten.
Each sample was axially compressed 1.0 mm for 30 seconds using a metered screw clamp.
Insert the screw clamp 9 into the designated notch 13 and clamp down the power tool s. fig. E.
Adapt the threaded rod 48 of the screw clamp to the work.
Each model was axially compressed 1.0mm for 30 seconds using a metered screw clamp.
The height pole plate 27 also includes a threaded hole into which a screw clamp 28 is screwed.
The height tube 11 also contains a threaded hole into which a screw clamp 12 is threaded.
