Examples of 'clamping screw' in a sentence
Meaning of "clamping screw"
A clamping screw is a type of fastening device used to hold objects together by applying pressure through the screw head
How to use "clamping screw" in a sentence
Basic
Advanced
clamping screw
Then tighten the clamping screw firmly.
Clamping screw for a possible ground connec.
Tighten the blade clamping screw securely.
Clamping screw for securing the safety guard.
Tighten the blade clamping screw again.
A loose clamping screw could be extremely dangerous.
Release the depth gauge clamping screw.
Ground clamping screw for turntables connected.
Tighten the depth gauge clamping screw.
Turn the clamping screw tight again.
Rotating device with graduation and clamping screw.
Tighten the clamping screw clockwise up to the stop.
Fastening on track with clamping screw.
Remove clamping screw of the insert.
Table by tightening the clamping screw firmly.
See also
Clamping screw accessible from above and below.
A first clamping element is the insert clamping screw.
Use a clamping screw to fix the holder on the bottle.
The clamps are loose once the clamping screw has been removed.
Tighten clamping screw while holding the insert in place.
Secure the wire in place using the lug clamping screw.
Tighten the clamping screw to secure the guard in position.
Fasten the comparison bridge using the side clamping screw.
Remove the clamping screw from the outer clamping.
Slide the rip fence guide under the clamping screw.
Turn the clamping screw in the upper transverse link clockwise.
Place it on the tool and secure it with the clamping screw to install.
Loosen the clamping screw using the hex key provided.
Then use blade wrench to tighten the spindle clamping screw thoroughly.
Tighten the blade clamping screw firmly using the spanner.
The disadvantage of these connectors is that access to the clamping screw is difficult.
Loosen the clamping screw on the guide fence by turning counterclockwise.
The hot air nozzles are fastened to the heating element using a clamping screw.
Turn the saw blade clamping screw with the hex.
Insert clamping screw into the bracket and secure cooktop to countertop.
Use the wrench to release the clamping screw by turning it counterclockwise.
The clamping screw then has its axis substantially perpendicular to the slots.
Horizontal clamping screw.
Use the clamping screw when there is a wooden wall surface.
The fluid head is tightened onto the tripod via the clamping screw.
With the clamping screw fixation of the rip fence can be.
The axis is fixed again on the opposite side with the second clamping screw.
Tighten the blade clamping screw firmly using the hex key.
The cutting insert may be devoid of a through bore suitable for accommodating a clamping screw.
Tighten each clamping screw with the appropriate torque see table.
Align the seat and screw it tight in the desired position using the clamping screw.
Tighten the blade clamping screw firmly with the blade wrench.
Fit the outer clamping flange back into position and tighten the clamping screw.
Tighten the clamping screws starting with the central clamping screw.
Close the telephone and fix the cover to the base using the clamping screw.
You'll also be interested in:
Examples of using Clamping
Show more
Clamping force is generated according to actuation torque
Then tighten the clamping screw firmly
Clamping off the renal artery now
Examples of using Screw
Show more
Tighten the screw through the clips
Screw the two sections of pole together
Remove the screw on the rear coupler
