Examples of 'loosen the screw' in a sentence
Meaning of "loosen the screw"
loosen the screw: to loosen a fastener or to relax a strict rule or situation
How to use "loosen the screw" in a sentence
Basic
Advanced
loosen the screw
Loosen the screw at the rod extensions.
First use a screwdriver to loosen the screw.
Loosen the screw securing the lever.
Use a screwdriver to loosen the screw holding the.
Loosen the screw on the depth adjustment.
Turn counterclockwise to loosen the screw.
Loosen the screw holding the filter.
First use a hex wrench to loosen the screw.
Loosen the screw on the case bottom.
He used all of his efforts to loosen the screw.
Loosen the screw on the guide plate.
Use a small slotted screwdriver or coin to loosen the screw on.
Loosen the screw on the battery compartment.
Use a hex key to gently loosen the screw on the lens.
Loosen the screw in the battery door.
See also
Use a screwdriver to loosen the screw on the bottom of the product.
Loosen the screw fully and remove it.
Use a precision screwdriver and loosen the screw on the battery cover.
Loosen the screw securing the port cover.
Use the hex wrench to loosen the screw which secures the punch.
Loosen the screw ring fully.
Turn off the device and loosen the screw of the battery compartment.
Loosen the screw on the footplate.
Use the security screwdriver to loosen the screw on the top of the cradle lock.
Loosen the screw on the right as shown in illustration.
Extract the sound module and loosen the screw of the cover of the battery compartment.
Loosen the screw from the case bottom.
This large contact surface will allow the application of sufficient torque to loosen the screw.
Slightly loosen the screw as illustrated.
Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp.
Loosen the screw holding the scale indicator.
Use a coin or flathead screwdriver to loosen the screw fastening the cover completely Q.
Loosen the screw securing the stopper pole.
Use a small Phillips screwdriver to loosen the screw on the back of the device.
Loosen the screw by turning counterclockwise the knob.
Use a small Phillips screwdriver to tighten or loosen the screw for friction strip.
Loosen the screw from the battery cover.
Use a Phillips head screwdriver to loosen the screw in the bake burner air shutter.
Loosen the screw connections with the unit.
Remove the Screw Cover at the bottom and loosen the screw.
Loosen the screw and open the protector.
If the strip kinks, loosen the screw slightly.
Loosen the screw to the point at which the.
If adjustment is required, loosen the screw to the belt.
Loosen the screw and remove the key.
To adjust the position, loosen the screw w and then.
Loosen the screw and adjust the clearance as.
Using the screwdriver, loosen the screw on the lampmodule.
Loosen the screw to remove the belt clip.
If the lens does not come out, loosen the screw.
