Examples of 'tighten the knob' in a sentence
Meaning of "tighten the knob"
The instruction 'tighten the knob' guides someone to fasten or secure a knob or handle by turning it in a clockwise direction. This action is typically required to ensure that the knob is firmly attached or fixed in place, preventing it from becoming loose or unstable during usage or operation
How to use "tighten the knob" in a sentence
Basic
Advanced
tighten the knob
Tighten the knob to secure the mount.
Workpiece and tighten the knob.
Tighten the knob securely by turning it clockwise.
Close the casing again and tighten the knob.
Tighten the knob onto the bolt by.
Depth of the hole and tighten the knob bolt securely.
Tighten the knob to secure the wire.
Push the connector through the holes and tighten the knob.
Tighten the knob to secure the tiller.
Once the correct height has been set tighten the knob again.
Tighten the knob again in clockwise direction.
Product security is not compromised if you choose to not tighten the knob.
Firmly tighten the knob to lock in place.
Attach the air cleaner cover and tighten the knob bolts.
Tighten the knob and secure the cable.
See also
Refit the overhead guard to the support and tighten the knob.
Tighten the knob and secure the cables.
Attach the air cleaner cover and tighten the knob bolt.
Tighten the knob do not overtighten.
Adjust handle to the most comfortable position and tighten the knob fi rmly.
Firmly tighten the knob clockwise so that the.
Fasten the handle holder to the control pipe and tighten the knob on the holder.
Tighten the knob to secure it in place.
Insert a loosened flange into one end of the media roll and tighten the knob.
Tighten the knob and secure the wire.
Push the carriage toward the guide fence and tighten the knob to secure the carriage.
Tighten the knob onto the bolt by turning it clockwise.
N Replace the carburetor box cover and tighten the knob.
Tighten the knob once you are at the correct angle.
Before using the unit, tighten the knob securely.
Tighten the knob by turning clockwise to secure the wire.
Once satisfied with the width, tighten the knob.
Tighten the knob or lever to lock the saw shoe in place.
When the speaker is aimed properly, tighten the knob.
Position it and tighten the knob before starting the exercise.
When you reach the desired angle, tighten the knob.
Then tighten the knob at the end of the search coil.
Set the correct cut width and tighten the knob 9.
Then tighten the knob clockwise firmly to secure the arm.
Then adjust the camera angle and tighten the knob again 8.
Tighten the knob just enough to keep the search coil from rotating or wobbling.
Before using the unit, tighten the knob securely by turning clockwise.
Tighten the knob when your TV is set to the desired tilt.
To reassemble, put the transparent cover back on top and tighten the knob clockwise.
U Tighten the knob to lock the saw shoe in place.
Rotate the swivel mount bracket à to an optimal viewing angle, and tighten the knob.
Be sure to tighten the knob on the back of the Manual Control Panel.
Move the auxiliary handle ( H ) to a position that is comfortable to you and tighten the knob O.
Tighten the Knob to secure the Handle.
Once adjusted, tighten the knob firmly.
You'll also be interested in:
Examples of using Knob
Show more
Press the volume knob during a call
Each knob is marked with an alchemical symbol
Turn the thermostat knob to a lower number
Examples of using Tighten
Show more
Tighten the screw through the clips
I will just tighten these up for you
Tighten properly the connection block screws
