Examples of 'clamp jaws' in a sentence
Meaning of "clamp jaws"
To clamp jaws means to tightly close one's mouth or forcefully shut one's teeth together. This phrase is often used metaphorically to describe an intense or unyielding determination or stubbornness
How to use "clamp jaws" in a sentence
Basic
Advanced
clamp jaws
Clamp jaws around the phase wire.
Jaw trigger for opening the transformer clamp jaws.
The clamp jaws enable the clamping height to be.
The contact surfaces of the clamp jaws must be clean and properly closed.
The clamp jaws are made from flexible sheet metal.
The case can thus be brought by any appropriate means between the clamp jaws.
Mount other clamp jaws and also tighten nuts.
A spring mechanism is attached between the toggle linkage assembly and the clamp jaws.
Both clamp jaws are flat.
Furthermore, the relief device comprises a supporter detachably and adjustably secured to the clamp jaws.
Clamp jaws must be placed on the side of the cable under load.
Connect the test leads or clamp jaws to the circuit / component to be measured.
Clamp jaws clamp hosiery supported upon the points of the toe-closing machine.
Input is made through the clamp jaws for non-invasive current measurements.
The clamp jaws each define a clamp surface which engages the catheter exterior surface.
See also
Thus, the toggle linkage assembly represents one means for rapidly releasing the clamp jaws.
The clamp jaws take off the hosiery and transport the hosiery to a photo-electric cell.
ACA function Inputs are made through the clamp jaws for non-invasive ACA current measurements.
The upper line is vented to air during this time by leaving clamp jaws 64 open.
Clamp jaws must be placed at the load bearing cable - see Figure 5.7.
A supporter 19 is detachably and adjustably secured to the clamp jaws 18.
Placed to the bottom of clamp jaws (see Fig. 1) which detect the AC voltage 2.
Clamping the leading end of the bead wire by the clamp jaws of the chuck ( 56 ) ;.
The clamp jaws are shown in FIG . 10 in the closed position during butt-welding.
Fig . 47 is a top plan view of the blanks and clamp jaws in the open position ;.
FIG . 3 an identical view of that of FIG . 2 in which the clamp jaws are closed.
