Examples of 'clamp lever' in a sentence
Meaning of "clamp lever"
clamp lever - This phrase refers to a device or mechanism that is used to secure or fasten objects together. It implies that the lever is designed to hold something in place tightly, typically by applying pressure
How to use "clamp lever" in a sentence
Basic
Advanced
clamp lever
Loosen clamp lever approximately three turns.
Adjusting the position of the clamp lever.
Loosen clamp lever approximately six full turns.
Unlock the guard clamp lever.
Loosen clamp lever ap proximately six full turns.
Unlock the yoke clamp lever.
Lift blade clamp lever located on side of saw.
Open the footplate clamp lever.
Turn the clamp lever counterclockwise.
Release the yoke clamp lever.
Push the clamp lever downwards.
Lock the arm using the mitre clamp lever k.
Open the base clamp lever to release the.
All depth adjustments must be made with the base clamp lever released.
Tighten the clamp lever up again.
See also
Position clamp around one wire or conductor and release the clamp lever.
For tool with clamp lever type wheel guard.
Adjust appropriate handlebar position and then tighten position with clamp lever.
Release the other clamp lever by repeating the same procedure.
Do not operate grinder with a loose guard or clamp lever in open position.
Then return the clamp lever to the original position to secure it.
Do not tighten adjusting screw with clamp lever in open position.
Convenient clamp lever on height adjustable parts locks them in place.
Do not operate the grinder with a loose guard or the clamp lever in open position.
The blade clamp lever rotates and the saw blade is fixed.
Do not tighten the adjusting screw with the clamp lever in the open position.
Rotate the clamp lever downward until the clamp is fully opened.
Secure the additional clamp using the clamp lever and the rotary knob.
The pivoting clamp lever and the pivoting coil assembly are coaxial.
Adjust the angle of the cutter unit and turn the clamp lever clockwise to secure.
The variant without clamp lever is clamped when the screw is tightened.
To open clamp grip, pull out clamp lever.
The quick release clamp lever unlocks and locks the fence.
Hold router in horizontal position, open base clamp lever.
Then return the clamp lever to the original position to secure the paper.
For intermediate angles, use the bevel clamp lever only.
Close the clamp lever to secure the surface grinding shroud on the gear case.
For intermediate angles, use the mitre clamp lever only.
It lacks a clamp lever among the tools from the garage is what the killer used.
To remove the curling tongs, press on the clamp lever and open.
Unlock the Clamp Lever and allow the base to fall to the new setting.
Re-clamp the motor by pressing base clamp lever into closed position.
Lock the Clamp Lever in place and the depth is set.
After adjusting to the prescribed cutting depth, tighten the clamp lever securely.
Raise the Clamp Lever and remove the motor unit from the router.
To remove the curling tongs, press the clamp lever and pull out.
The clamp lever has a springloaded ratchet-type action and is operated as follows.
To install the abrasive paper, operate the clamp lever to open the paper clamp.
Clamp lever fully, the lever may not be locked in the released position.
A release pull rod B push clamp lever C draw back the pull rod into the gun barrel.
You'll also be interested in:
Examples of using Clamp
Show more
Do not subject the clamp to running water
You clamp the top of your throat
Then tighten the clamp screw securely
Examples of using Lever
Show more
Do not lift lever during brewing cycles
Lever can be adjusted to a different lever angle by
Open the lock lever to unlock footplate
