Examples of 'hose clamp' in a sentence
Meaning of "hose clamp"
hose clamp: A hose clamp is a device used to attach and seal a hose onto a fitting such as a barb or nipple
Show more definitions
- A device used to attach and seal a hose onto a fitting.
How to use "hose clamp" in a sentence
Basic
Advanced
hose clamp
Hose clamp just needs tightening a little.
Secure with the hose clamp provided.
Use a hose clamp to secure the connection.
I had to resort to a hose clamp on the handle.
Hose clamp with flat spring liner.
Replace hose and new hose clamp.
Close the hose clamp on each syringe.
Install adaptor elbow using hose clamp.
Tighten the hose clamp using a screwdriver.
Drain manually by removing drain hose clamp.
Place hose clamp around round end of blower.
Do not install cord under hose clamp.
The hose clamp is not reusable.
Use pliers to open the hose clamp.
Use a hose clamp to hold the hose in place.
See also
So when she put the hose clamp on my sack.
Slide hose clamp over end of discharge hose.
Secure steam hose to outlet with hose clamp.
Loosen hose clamp at top of canister.
Connect fuel line to tank with hose clamp.
Radiator hose clamp is always a flathead.
Secure the gas hose with hose clamp.
Loosen the hose clamp on the fuel tap.
Loosen ice chute hose clamp.
Place hose clamp over drain hose end.
Remove the hose by removing the hose clamp.
Radiator hose clamp is always a fIathead.
The two squares are secured with a hose clamp.
Radiator hose clamp is always a fIathwad.
Using a flat screwdriver loosen the hose clamp where.
Smallest hose clamp on the market.
Move into position and tighten the hose clamp.
Loosen hose clamp and remove discharge tubingDischarge tubing.
Mounting brackets wood screws wire ties hose clamp.
Place hose clamp provided around short end of thimble.
Fuel pipe and fix it with the hose clamp.
Tighten the drain hose clamp to secure the connection.
Fasten the tube fitting with the provided hose clamp.
Small adjustable hose clamp secures vent to drain pump.
Definitely use a hose clamp.
Gap connector hose clamp strain relief electrical tape.
Secure the hose to the vent box using a hose clamp.
Use a hose clamp or aluminum tape for airtight connections.
Position the upper jet hose clamp on the jet hose.
The hose clamp valves are very reliable and durable.
Rubber hose clamp.
Fit each hose connection with a stainless steel hose clamp.
Place the hose clamp over the washer drain connector.
Push or twist the hose on and secure it with a suitable hose clamp.
Leave the hose clamp shut and pull on the plunger.
You'll also be interested in:
Examples of using Hose
Show more
Store chemical hose so it is protected from damage
Hose nozzle air suction regulator is open
Disconnect hose from used water tank
Examples of using Clamp
Show more
Do not subject the clamp to running water
You clamp the top of your throat
Then tighten the clamp screw securely
