Examples of 'loosen the knob' in a sentence
Meaning of "loosen the knob"
loosen the knob: This phrase means to make a knob or handle less tight or easier to turn. It is often used when referring to adjusting the controls of devices or machinery
How to use "loosen the knob" in a sentence
Basic
Advanced
loosen the knob
Carefully loosen the knob set screw.
Grasp the Throttle Handle with one hand and loosen the Knob with the other.
Loosen the knob to offload the springs.
To adjust the coil, simply loosen the knob.
Loosen the knob to change the position.
If the produce starts to back up through the feeding chute, loosen the knob.
Loosen the knob on the hemostatic adapter.
To remove the side handle, loosen the knob bolt and rotate the handle.
Loosen the knob by turning it counterclockwise.
To adjust the bevel angle, loosen the knob at the rear of the tool counterclockwise.
Loosen the knob on the air filter cover.
For removing or changing the attachment, Loosen the knob.
Loosen the knob at the rear of the tool.
Screw the knob until it bottoms, and then loosen the knob 2 turns.
Loosen the knob on the bolt by turning it counter clockwise.
See also
To adjust the sliding fence, loosen the knob ( K ) and slide the fence in or out.
Loosen the knob on the coupler of the power head.
Dismounting the saw blade ( 1 ) Loosen the knob and slightly reduce the cutting.
Loosen the knob which secures the slide poles.
To provide maximum workpiece support when cutting smaller pieces, loosen the knob ( K ) three full turns.
Loosen the knob and slightly reduce the cutting.
How to connect 1 Loosen the knob.
Loosen the knob on the gauge and align to desired.
Air filter Loosen the knob and remove the air cleaner cover.
Loosen the knob on the bottom of the air filter cover.
If necessary, loosen the knob and adjust the angle of the installation cradle.
Loosen the knob on the back of the loudspeaker so it can swivel.
Loosen the knob and lift off the cylinder cover.
Loosen the knob counterclockwise so that the carriage can slide freely.
Loosen the knob on the handle and extend handle to desired height.
Loosen the knob on the bevel scale plate on the front of the base.
Loosen the knob on the coupler of the power head shaft by turning it counterclockwise.
Loosen the knob when you need to move the grinding head up or down.
Never loosen the knob which secures the carriage while the blade is rotating.
Loosen the knob on the coupler and remove the hanger cap from the attachment.
Loosen the knob on the top bearing housing and slide the AUTOFEED onto the pigtail.
Loosen the knob on the TV bracket to adjust the tilt of your TV.
Loosen the knob on the side handle, and insert the.
Loosen the knob to adjust the clamp up or down, then use the fine.
Next, loosen the knob for the positive ( this is usually colored red ) connection.
Loosen the knob ( D ) each of the upper cover and the lower cover.
Loosen the knob ( A ) and lift off the cylinder cover.
Loosen the knob to adjust the tiller to positions you want . Fig . B.
Loosen the knob on the gauge and align to desired angle 0 to 60.
You'll also be interested in:
Examples of using Knob
Show more
Press the volume knob during a call
Each knob is marked with an alchemical symbol
Turn the thermostat knob to a lower number
Examples of using Loosen
Show more
Loosen the screw at the rod extensions
Use a screwdriver to loosen the air shutter
Loosen the lower pin with a key
