Examples of 'loosen the clamp' in a sentence
Meaning of "loosen the clamp"
loosen the clamp: Instructs to make a fastening device less tight. This phrase is often used in mechanical or construction contexts where a clamp secures two objects together, and adjustment or removal is required
How to use "loosen the clamp" in a sentence
Basic
Advanced
loosen the clamp
Loosen the clamp screws on the handle just enough to.
Place the tool on its side and loosen the clamp screw.
Loosen the clamp screw of the side grip by turning it counterclockwise.
Using a screwdriver, loosen the clamp screw.
Loosen the clamp screw so it can slide along the shaft.
To move the rip fence, loosen the clamp handle while.
Loosen the clamp nut and widen the side handle base.
To rotate the track arm, loosen the clamp knob and rotate the arm.
Loosen the clamp and remove the spark arrestor screen from.
To adjust pointer 0 setting, loosen the clamp handle.
Just loosen the clamp nut to swing the side handle to a desired position.
Never tighten or loosen the clamp while the pump is operating.
Loosen the clamp bolt by turning it clockwise with the socket wrench supplied.
Now you need to loosen the clamp that holds the battery.
Loosen the clamp screw and adjust the depth gauge to the desired depth.
See also
To remove the blade, loosen the clamp screw and open the blade cover.
Loosen the clamp screw on the bevel scale plate on the front of the base.
To do this, loosen the clamp screw on the side of the tool.
Loosen the clamp and remove the spark arrestor screen from the muffler.
Never loosen the clamp screw which secures the carriage while the blade is rotating.
Loosen the clamp screw in the sensor ball joint and gently rotate the sensor.
Loosen the clamp and carefully remove the exhaust vent from the dryer exhaust outlet.
Loosen the clamp and gently remove the exhaust vent from the dryer exhaust outlet.
Loosen the clamp which secures the hose, supporting it so that no water.
Loosen the clamp screw, adjust the tube with the footboard to the desired position.
Loosen the clamp screw of the dust extractor attachment by turning it counterclockwise . Fig.
Loosen the clamp screw, set to desired position, then tighten the clamp screw.
Loosen the clamp holding the spark arrestor onto the muffler see Figure 39.
Loosen the clamp screw ( EE ) Fig . 15 to set the power unit in the base unit.
