Examples of 'adjusting screws' in a sentence
Meaning of "adjusting screws"
adjusting screws: The act of turning or modifying screws on a device or machinery to achieve a desired fit, alignment, or function. This phrase is frequently used in instructions for assembling or repairing equipment
How to use "adjusting screws" in a sentence
Basic
Advanced
adjusting screws
Not adjusting screws oiling port clean.
The carburetor has three adjusting screws.
Turn two adjusting screws counterclockwise.
Except carburetor idle speed adjusting screws are tight.
Adjusting screws counterclockwise to adjust the positive stops.
There are two adjusting screws for each blade.
Loosen the six kerf plate adjusting screws.
These adjusting screws are not intended for user adjustment.
All accessible screws except for adjusting screws.
Adjusting screws stand out and without protective cap.
Accessible screws and nuts not adjusting screws.
Front stock adjusting screws and their locking screws.
The damping degree can be managed through the adjusting screws.
Loosen the motor belt adjusting screws on motor bracket.
Four adjusting screws can make the actuator more accurate.
See also
Turn the two front roller adjusting screws clockwise.
Appropriate adjusting screws or other means may be provided for this.
The lateral pressure can be easily readjusted with adjusting screws.
Turn the two adjusting screws to adjust the blade protrusion.
A seal plate is coupled to the anchor with a plurality of adjusting screws.
Retighten the adjusting screws and remove the wood block.
Adjust the height and align horizontally with the adjusting screws.
Adjusting screws for the position of the keel of the upper table.
Now fit the upper handle using the plastic adjusting screws.
Base adjusting screws must be tight and secure before making cut.
The clearance of the steps can be changed by screwing the adjusting screws.
Turn the adjusting screws clockwise to retract the blade or counterclockwise to protrude it.
High rigidity ink blade can not be precisely controlled by adjusting screws.
Tighten the adjusting screws again and fix back the front cover.
Make sure the cover is flush and adjust it with the adjusting screws.
Use the adjusting screws to adjust the hinge post widthwise in the appliance.
Tighten the jam nuts against the clips and at the adjusting screws.
The adjusting screws on this carburetor can only be set within narrow limits.
Never tamper with the seals of the adjusting screws located on the gas valves.
The adjusting screws according to the invention make the adjusting operation easier.
The correct speed can be set using the adjusting screws on the fuel pump.
Never force the adjusting screws beyond the maximum opening and closure positions.
Loosen the ring on the bracket and the adjusting screws shown in the figure.
Remove the protective cover of the reticule and slightly loosen the four adjusting screws.
Tighten or loosen the adjusting screws and keep in mind that the pressure for each.
With this carburetor it is only possible to correct the adjusting screws within fine limits.
Periodically tighten the adjusting screws on the helmet and those that attach the facial shield.
The anchor include a plurality of threaded adjusting screw openings sized to receive the adjusting screws.
The device requires effective access to the adjusting screws for coupling the drive means.
Check the gauge with a square against the blade and tighten the three adjusting screws.
I Make sure that all adjusting screws are properly tightened.
Loosen the jam nuts on the height of cut clips and adjusting screws E.
N Carefully turn both adjusting screws counterclockwise as far as stop.
Air intake Cylinder fins Fuel tank All accessible screws except carburetor adjusting screws.
The adjusting screws also prevent the CSC panel from slipping.
You'll also be interested in:
Examples of using Adjusting
Show more
Adjusting the balance effects all sources
Proceed as for adjusting the left fence
Adjusting the white balance manually recommended
Examples of using Screws
Show more
The screws are provided in the literature pack
Fully tighten screws with hex wrench
Screws are visible on the burner control panel
