Examples of 'hex screw' in a sentence
Meaning of "hex screw"
hex screw - a type of screw with a hexagonal-shaped drive head, commonly used in applications where high torque is required or to prevent cam out
How to use "hex screw" in a sentence
Basic
Advanced
hex screw
Place the washer on the hex screw.
Cable block hex screw on back.
Online shop stainless steel hex screw.
Slightly loosen the hex screw on the bracket.
It is particularly important to tighten the central hex screw.
Remove the hex screw on the.
Slide the flat washer onto the hex screw.
Securely tighten the hex screw and coved spacer.
The hex screw must be tight but avoid over tightening.
Retighten the upper hex screw.
Loosen the hex screw on the cover and remove it.
It can be pulled out and is held in place with the hex screw.
Tighten loosened hex screw and verify the door is level.
The fixing of the knobs is provided with one incorporated hex screw in each knob.
Remove hex screw and wing nut from grass deflector.
See also
Place the wing nut on the hex screw and tighten securely.
Tighten hex screw with hex wrench provided with handle kit.
Remove the flange lock nut and hex screw from the deck.
Remove hex screw on right side of unit that attaches to the fail screen.
Press end plug over hex screw until firmly sealed.
Replacing the traction tires - Remove the hex screw on the.
Loosen the rear hex screw on the cable adjustment bracket.
Remove hairpin clip, wing nut and hex screw from chute.
Loosen the lower hex screw on the drive cable bracket.
Replacing the traction tire - Remove the hex screw on the.
Tighten the hex screw to fix the control lever in the adjusted position.
Remove cotter pin, wing nut and hex screw from chute.
Remove the hex screw that is used to secure the side panel to the right.
To readjust the control cable, loosen the upper hex screw on the auger cable bracket.
Remove the hex screw and slide the assembly off the tine shaft.
Finally, retighten the hex screw.
Tighten the hex screw and flange lock nut to secure in the adjusted position.
Slide the flat washer ( b ) onto the hex screw a.
Remove the hex screw securing the engine pulley keeper rod to the frame.
Place the belleville washer ( d ) over the steering wheel ( a ) and secure with the hex screw e.
Remove the hex screw and coved spacer that secure the mounting tube to the footrest.
Retighten the inner hex screw ( 1 ) by turning it.
Insert the hex screw through the grass deflector and the bracket on the curved shaft.
BS standard carbon 20 size steel 3mm hex screw bolt nut.
Remove the upper hex screw and flat washer securing the lever to the pivot bracket.
Capacities Wood screw 6 mm Self drilling screw 6 mm Hex screw 6 mm.
Insert the hex screw with washer through the control lever slot and the pivot bracket.
Apply Loctite 242 to threads of EXISTING hex screw.
Cover Fixing screw Hex screw for fixing the knob onto the shaft.
Tighten hex screw [ 7 ] to secure the horizontal position and hex screw [ 6 ] for the vertical position.
Using a 1 ⁄ 2 ” wrench, remove the hex screw securing the belt keeper to the engine.
X M8 hex screw with washer and spring washer.
Re-insert the hex screw and tighten securely.
Remove hex screw ( b ) on top of rear housing.
Tighten the hex screw using the Hex key 9.
